StarTech.com UNI3510U2EB Manuel d'instructions

3.5” External Hard Drive Enclosure3.5” eSATA/USB 2.0 to IDE/SATA External Hard Drive Enclosure with One-Touch BackupUNI3510U2E / UNI3510U2EGB UNI3510U

7eSATAIf you are using the eSATA interface to connect the hard drive enclosure to your computer, there are two setup processes you can follow. If the

8eSATAIf you are using the eSATA interface to connect the hard drive enclosure to your computer, there are two setup processes you can follow. If the

9SpecicationsBus InterfaceSATA 3.0Gb/sUSB 2.0Chipset IDJMicron JMB20337External Connectors1 x eSATA connector1 x USB Mini B connector1 x DC Power con

10Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions.

StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans m

FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

iTable of ContentsIntroduction ... 1Packaging Contents...

1IntroductionThis enclosure lets you turn any 3.5” Serial ATA or IDE hard drive into an eSATA or USB external hard drive, with support for drives up t

2Hardware GuideFront PanelRear Panel123412Power Button/LED1. Backup Button2. DC In Port1. eSATA Port2. Mini USB Port3. Hard Drive Release Switch4.

3InstallationHardware InstallationOpen the hard drive enclosure by pushing the rear panel release 1. button to the right and sliding the hard drive br

4IDE HDD: If you will be using the USB 2.0 interface to connect to the hard drive, plug the 40-pin IDE data cable into the port labelled CN1 on the en

5Insert the Drivers CD into your computer’s CD-ROM. Open the 1. DRIVERS.exe application to begin the installation process.Once the installer is runnin

6Click Browse to designate the directory in which the software will 5. be installed. Once you have made your selection, click Install to continue.The