StarTech.com ECESAT32 Spécifications télécharger pdf (Page 6)

Instruction Manual

Verifying Installation

Windows XP/Server 2003/Vista/Server 2008 R2/7

From the main desktop, right-click on “My Computer” (“Computer” in Vista or later), then select

“Manage”. In the new Computer Management window, select Device Manager from the left

window panel.

Under the “SCSI and RAID Controllers” category (“Storage Controllers” in Vista or later), should

be a “Marvell 91xx” device. Right-click on the device and select “Properties” to make sure it is

installed and working correctly.

For Windows 7, if using the native drivers, the card will instead be listed under the “IDE ATA/ATAPI

Controller” category as a “Standard AHCI” device.

How to Use

RAID Conguration

To setup a RAID array using the drives connected to the SATA controller card, the BIOS level

conguration menu must be accessed. To access the conguration menu, during POST

(computer startup), the status display for the controller card will display. When prompted,

pressing [CTRL] + [m] will enter the conguration menu. From the conguration menu, the

detected drives can be congured into any of the supported RAID modes by following the on

screen prompts.

1 2 3 4 5 6 7 8 9

Pas de commentaire

StarTech.com ECESAT32 Spécifications Page 6