StarTech.com PCI2PCMCIA1E Spécifications télécharger pdf (Page 6)

Instruction Manual

Inserting a CardBus card

1. Once the computer has fully rebooted following software installation, align the PC (CardBus)

card with the slot provided by PCI to PC Card Adapter. Gently push the card into the slot until

the Ejector Tab pops out.

2. Windows should recognize the inserted card automatically, and ask for the software driver.

Please refer to the user manual provided with the PC (CardBus) card at the time of purchase.

3. After the drivers have been installed, the corresponding power indicator will light up,

indicating that the card is now powered and ready for use.

Removing the inserted CardBus card

1. To remove your PCMCIA card while the unit is running, click on the Safely remove Hardware

icon near the clock in the Windows taskbar (typically found in the lower right corner of

your screen.) Highlight your PCMCIA card and then click on the Stop button. When the

conrmation window appears click on the OK button.

2. Push the Ejector Tab, and remove the PC Card (PCMCIA) from the slot.

1 2 3 4 5 6 7 8 9

Pas de commentaire

StarTech.com PCI2PCMCIA1E Spécifications Page 6