StarTech.com PCISATA4R1 Spécifications télécharger pdf (Page 9)

Instruction Manual

After you select which RAID level you wish to use, you will have to select drives to include in the

array. Follow the on-screen prompts to complete the conguration. Please note: If you wish to use

the RAID 1+S (“spare drive”) option, you must congure a RAID 1 array rst.

Deciding which RAID solution to implement has some important implications for the performance

of your system and the safety of your data. This is intended as a guide only, so you should investigate

the wealth of information available on the Internet or consult with a computer system professional

for further assistance in deciding which solution will best meet your needs.

Deleting a RAID set

1. To remove one or more RAID sets, select

“Delete RAID Set.”

2. Select the desired set and press Enter.

3. When asked “Are You Sure?”, Press ‘Y’.

4. The drives will be returned to the selection of

logical drives from which a new RAID set can

be created.

Rebuilding a RAID 1 Set

This menu selection is used to initiate the copying

of data from an existing drive to a replacement

drive that has been installed in a RAID 1 set after

the failure of one of the members.

1. Select “Rebuild RAID1 set.

2. Select the desired set and press Enter.

3. Press “Y” when asked, “Are You Sure?”

4. The set will be rebuilt. The status of the rebuild

is displayed in the MAIN MENU window.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Pas de commentaire

StarTech.com PCISATA4R1 Spécifications Page 9