StarTech.com SAT32MSATPEX Manuel d'instructions télécharger pdf (Page 9)

Instruction Manual

PCI Stando installation

(Only required for PCI Slot Installation)

1. Remove the bracket by unscrewing the bracket screws from the top of the

SAT32MSATPEX board using a small Phillips head screw driver (not included).

2. Place the PCI slot standos between the mounting holes on the bracket and the

bracket holes on the on the bottom of the SAT32MSATPEX.

3. Drive the screws through the bracket holes on the SAT32MSATPEX and the PCI

slot standos, into the mounting holes on the bracket using the small Philips head

screw driver.

4. The SAT32MSATPEX is now ready for installation into a PCI slot.

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

StarTech.com SAT32MSATPEX Manuel d'instructions Page 9