StarTech.com 4 Port StarView Dual DVI USB KVM Switch w/ Audio Manuel d'instructions télécharger pdf (Page 11)

Instruction Manual

Auto-scan <ScrLk>+<ScrLk>+<S>

Automatically cycle

through active ports in

sequence every 10 seconds.

Auto-scan with

programmable

delay

(<z>= 0~9: where 1=10sec,

2=20sec…9=90sec,

0=100sec)

Auto-scan with a custom

set delay time.

Stop Auto-scan Press any key on keyboard

Terminate Auto-scan

activity.

1. The USB keyboard hotkeys allow you faster and broader control of KVM switching

operation, in addition to the front-panel buttons. If you have congured a hotkey

preceding sequence other than two consecutive scroll locks, you should change

your hotkey sequence accordingly.

2. When the binding of PC, Audio and Mic switching is enabled by the hotkey

sequence: ScrLk + ScrLk + Q, any PC, audio and mic switching are bound together.

To remove this binding, use the hotkey sequence: ScrLk +ScrLk + W

LED Information

Green LED indicates PC port status: solid green – active port; flashing green – PC

not connected;

Red LED indicates hub port control status: solid red – that PC has the control of all

hub ports.

1 2 ... 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

StarTech.com 4 Port StarView Dual DVI USB KVM Switch w/ Audio Manuel d'instructions Page 11