StarTech.com PEXMSATA343 Manuel d'instructions télécharger pdf (Page 14)

Instruction Manual

WARNING! Capacity mode is a data-destructive process. Please back up all data before

using capacity mode.

Card BIOS Method

1. When prompted on startup, press Ctrl+M to enter the card BIOS utility

Press <Ctrl>+<M> to enter BIOS Setup or <Space> to continue_

2. Using the arrow keys to navigate, move to “HBA0: Marvell 0” and press Enter

to select

3. Press Enter again to open the Conguration Wizard

4. Use the arrow keys to scroll through the list of free physical disks to select the drives

that will be part of the HyperDuo set. Press Space to select/de-select a disk.

NOTE: When a disk is selected, an asterisk (*) appears to the left of the disk label.

5. After selecting the required disks, press Enter to continue.

6. The “Create Virtual Disk” conguration options appear in the “Information” pane

(right-side), here you are able to select HyperDuo or RAID options

NOTE: The default HyperDuo mode is Safe mode.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

StarTech.com PEXMSATA343 Manuel d'instructions Page 14