StarTech.com NETRS2321P Manuel d'instructions télécharger pdf (Page 10)

Instruction Manual

Web Console Operation

Enter the IP address you have set for the

NETRS2321P device into your web browser

address bar (default IP: 10.1.1.1) and you will

prompted to login with your user ID and

password (Default: admin/admin).

After a successful login, you will see Administrator,

TCP Mode, UDP Mode, UART, and Reset Device

selections in left frame of the web console - the

following sections will describe their function.

Administrator

Under the ‘Administrator’ heading, you will be able to set/change the device password,

congure the networking parameters, display the current rmware version, load the

factory defaults, and perform any future rmware upgrades.

Authentication

In this page, you can change login ID and Password. The NETRS2321P device supports

a maximum of 15 characters for password, only alphanumeric characters are allowed

(“0-9”,”a-z”,”A-Z”).

Press “Update” to store the data. Reset the device to take eect.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

StarTech.com NETRS2321P Manuel d'instructions Page 10