StarTech.com NETRS2321P Manuel d'instructions télécharger pdf (Page 13)

Instruction Manual

TCP Mode

NOTE: When TCP mode is set to Server or Client mode, the UDP mode will be

disabled automatically. When UDP mode is enabled, the TCP mode will be disabled

automatically.

Once you have completed making changes, press "Update" to store the data. Reset the

device to take eect.

Telnet Server / Client

Set the device to be a Telnet Server. In server mode, the Telnet port listens and waits

for a host or other client to make a connection. In this case the Ethernet connected

device is the client.

Set the device to be a Telnet Client. In the case the Ethernet connected device is the

Telnet server or other NETRS2321P in server mode.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Pas de commentaire

StarTech.com NETRS2321P Manuel d'instructions Page 13